Welding Gas Flow Rate Calculator
Calculate shielding or purge gas flow rates, consumption, and costs for your TIG or orbital welding project.
Gas Parameters
Results
Recommended Flow Rate
--
Gas per Joint
--
Total Gas for Project
--
K-Cylinders Needed (330 CF ea.)
--
Total Gas Cost
--
Gas Cost per Joint
--
Note: Shielding flow rates are based on general cup-size guidelines.
Actual rates vary by joint geometry, position, and draft conditions. Purge calculations assume
5 volume exchanges for adequate O2 displacement.
Need Gas Equipment or Flow Optimization Help?
TechSouth supplies gas delivery systems, flow meters, and purge monitoring equipment for orbital welding operations.
Contact TechSouth